At Volkswagen, the campaign covers vehicles manufactured between 24 September 2013 and 1 July 2024. For the Audi Q3, the period runs from 31 October 2017 to 23 May 2024.  (Photo: Shutterstock)

At Volkswagen, the campaign covers vehicles manufactured between 24 September 2013 and 1 July 2024. For the Audi Q3, the period runs from 31 October 2017 to 23 May 2024.  (Photo: Shutterstock)

A screw that is prone to breaking could cause a loss of steering on several Volkswagen models and the Audi Q3. According to the Adac, nearly a million vehicles are being recalled in Germany alone.

Owners of a Golf, Golf Variant, Tiguan, Touran, Caddy or Audi Q3, please take note. Your vehicle may be affected by a recall due to a fault with the steering mounting, according to the Adac, Germany’s leading motoring organisation, in a statement published on 24 September.

The issue concerns a bolt that may break as a result of corrosion. In the worst-case scenario, the steering could fail, increasing the risk of an accident. However, the German motoring organisation states that no property damage or personal injury linked to this fault is known at this stage.

700,000 Audi Q3s affected

Worldwide, the recall affects nearly 2.86 million vehicles, according to data from the KBA, the German Federal Motor Transport Authority, as reported by the DPA news agency. This total includes nearly 2.16 million Volkswagen vehicles and some 700,000 Audi Q3s. Nearly 955,000 vehicles are affected in Germany.

At Volkswagen, the campaign covers vehicles manufactured between 24 September 2013 and 1 July 2024. For the Audi Q3, the period runs from 31 October 2017 to 23 May 2024. The vehicles affected must be taken to a workshop for inspection and to have the screw replaced with a more corrosion-resistant version. The manufacturer codes used to identify the campaigns are 48VS for Volkswagen and 48LG for Audi.